Standing Seam Services
50
YEAR WARRANTY
STANDING SEAM PROFILES
SNAP LOCK PREMIUM
PRODUCT DATA
Product Data
Fastening System: Snap Lock Panel With Clips And Concealed Fasteners
Rib Height: 1.5″
Overall Width:
Standard: 18″
Custom Widths Available: 12″-20″
Panel Length: 1′ to 52′
Available Gauges:
26/Standard
24/Custom Ordered
Substrate:
AZ50 Minimum (aka Galvalume®)
Finishes: TEX SMTP
Recommended Minimum Roof Slope: 3/12
Installation:
Installation over a solid substrate with an underlayment between the panel and the substrate.
SNAP LOCK STANDARD
PRODUCT DATA
Product Data
Fastening System: Snap Lock Panel With Nail Strip
Rib Height: 1.5″
Overall Width:
Standard: 16″
Custom Widths Available: 12″-20″
Panel Length: 1′ to 52′
Available Gauges:
26GA
24GA
Substrate:
AZ50 Minimum (aka Galvalume®)
Finishes: TEX and SMTP
Recommended Minimum Roof Slope: 3/12
Installation:
Installation over a solid substrate with an underlayment between the panel and the substrate.
MECHANICAL LOCK
PRODUCT DATA
Product Data
Fastening System: Mechanically Seamed With Clips And Concealed Fasteners
Rib Height: 1.5″
Overall Width:
Standard: 16″
Custom Widths Available: 12″-20″
Panel Length: 1′ to 52′
Available Gauges:
26GA
24GA
Substrate:
AZ50 Minimum (aka Galvalume®)
Finishes: TEX and SMTP
Recommended Minimum Roof Slope:
2/12 Single Locked
< 2/12 Double Locked
Installation:
Installation over a solid substrate with an underlayment between the panel and the substrate.
MECHANICAL LOCK vs SNAP LOCK
Standing seam roofing systems are popular for their durability, sleek appearance, and weather resistance. Snap lock and mechanical lock are two common types of standing seam roofing, each with its own set of characteristics and installation methods. Here are the main differences between the two:
Ultimately, the choice between snap lock and mechanical lock standing seam roofing will depend on factors such as budget, aesthetic preferences, climate considerations, and specific project requirements. Here are the main features at a glance:
| Standing Seam Roof Type | Mechanical Lock | Snap Lock |
|---|---|---|
| 50 Year Warranty | Yes | Yes |
| Customizeable: Gauge, Width, Material | Yes | Yes |
| Solar Bracket Compatible | Yes | Yes |
| Suitable for Very Low Slopes | Yes | No |
| Roll Formed on Site | Yes | Yes |
STANDING SEAM COLOURS
TEX SERIES
SMP (Prepainted Textured Steel)
Tex Series has a unique textured finish on the product
ON SITE ROLL FORMING
| ON-SITE FORMING ADVANTAGES | DESCRIPTION |
|---|---|
| Customization | On-site roll forming allows for the creation of custom profiles and lengths to meet specific project requirements. |
| Enhanced Installation Efficiency | Profiles created on-site are typically delivered to the installation area in continuous lengths, which can streamline the installation process. This can result in faster project completion and reduced labor costs. |
| Minimized Material Waste | Roll forming on-site can minimize material waste because profiles are formed precisely to the required lengths, reducing the need for cutting and discarding excess material. |
| Most Cost Effective | Due to reduced waste, damage, transportation and increased installation efficiency, standing seam that has been roll formed on-site is most cost effective. |
| Improved Quality Control | With on-site roll forming, project managers and engineers have better control over the quality of the profiles produced. Any necessary adjustments or modifications can be made in real-time to ensure that the final product meets quality standards. |
| Reduced Transportation Costs | By producing the required profiles on-site, there is no need to transport large and bulky prefabricated materials, which can lead to significant savings in transportation costs and logistics. |
WHY CHOOSE US?
Our Installers strong, capable and show up to the jobsite ready to work. But don’t take it from us, these pictures say 1000 words…
WHY STANDING SEAM?
Frequently Asked Questions
What is Standing Seam Metal Roofing?
A standing seam metal roof is a type of roofing system that consists of metal panels with vertically oriented seams that interlock and stand above the roof surface. The term “standing seam” refers to the raised seams that run along the length of the panels, creating a distinctive and aesthetically pleasing appearance.
The panels used in a standing seam metal roof are typically made of steel, aluminum, or copper, although other metals can also be used. These panels are usually long and narrow, and they are installed from the eave to the ridge of the roof, overlapping and connecting with adjacent panels through a locking mechanism.
One of the key features of a standing seam metal roof is that it does not require exposed fasteners. The seams are raised above the flat surface of the panels, providing a continuous and watertight barrier against the elements. This design helps prevent water intrusion and enhances the roof’s durability and weather resistance.
Standing seam metal roofs offer several advantages. They are known for their longevity, as metal is a durable and long-lasting material. Metal roofs are also highly resistant to fire, wind, hail, and other extreme weather conditions. They can be more energy-efficient compared to traditional roofing materials, as they reflect sunlight, reducing heat absorption and cooling costs.
Additionally, standing seam metal roofs are often chosen for their modern and sleek appearance, making them popular in both residential and commercial applications. They come in a variety of colors and finishes, allowing homeowners and architects to customize the roof’s look to suit their preferences.
Installation of standing seam metal roofs typically requires specialized training and equipment, and it is recommended to hire professional roofers experienced in working with metal roofing systems to ensure proper installation and maximize the benefits of this type of roof.
How are Standing Seam Metal Roofs Attached?
Standing seam metal roofs are attached using a combination of clips and fasteners that secure the metal panels to the roof deck or underlying structure. The specific installation method may vary depending on the manufacturer’s guidelines and the design of the roof, but here is a general overview of the attachment process:
- Roof Preparation: Before installing the metal panels, the roof deck is typically inspected and prepared to ensure it is clean, dry, and in good condition. Any necessary repairs or modifications to the roof deck are addressed at this stage.
- Underlayment: A layer of underlayment is often installed on the roof deck as a secondary barrier against water infiltration. This underlayment helps to protect the roof from potential leaks and provides an added layer of weather resistance.
- Starter Strip: A starter strip is installed along the eave of the roof. This strip provides a secure base for the first row of metal panels and helps to ensure proper alignment and attachment.
- Panels and Seams: Metal panels, typically in long and narrow strips, are installed from the eave to the ridge of the roof. Each panel has vertically oriented seams that interlock with adjacent panels. The seams are raised above the flat surface of the panels, creating the characteristic standing seam appearance. The panels are aligned and interlocked using a variety of methods, such as snap-lock systems or mechanical seaming.
- Clips and Fasteners: Clips are attached to the roof deck or structural supports at regular intervals. The clips help to secure the metal panels in place and allow for some movement due to thermal expansion and contraction. Fasteners, such as screws or nails, are then used to attach the clips to the panels. The fasteners are typically concealed within the seams to maintain the sleek and clean look of the roof.
- Ridge and Flashing: At the ridge of the roof, special ridge caps are installed to cover and protect the seam ends. Flashing is also used in areas where the roof meets vertical surfaces, such as walls or chimneys, to provide a watertight seal and prevent water penetration.
How Much Does a Standing Seam Metal Roof Cost in Ontario?
The cost of a standing seam metal roof in Ontario, Canada can vary depending on several factors, including the size of the roof, the complexity of the installation, the type and quality of the metal panels, and the location of the property. Additionally, prices can fluctuate over time due to market conditions and other factors. It is always best to obtain specific quotes from roofing contractors in your area for accurate pricing information.
As a general guideline, the cost of a standing seam metal roof in Ontario typically ranges from CAD $12 to $25 per square foot (including materials and installation). This range can vary based on the factors mentioned earlier. Keep in mind that this is an estimate, and the final cost can be higher or lower depending on your specific requirements.
To get a more accurate estimate for your project, it is recommended to contact us. We will be able to provide you with a more precise cost based on the specifics of your project and the materials you choose.
Is a Standing Seam Roof Worth It?
A standing seam metal roof can be worth the cost for many homeowners, depending on their specific needs, preferences, and budget. Here are some factors to consider when evaluating the worth of a standing seam metal roof:
- Longevity and Durability: Standing seam metal roofs are known for their longevity and durability. They can last 40 years or more with proper maintenance, significantly longer than many other roofing materials. This can save you money in the long run by reducing the need for frequent roof replacements.
- Weather Resistance: Metal roofs are highly resistant to various weather elements, including wind, hail, and fire. They can withstand extreme weather conditions better than traditional roofing materials, offering enhanced protection for your home and potentially reducing insurance premiums.
- Energy Efficiency: Metal roofs have reflective properties that can help reduce heat absorption from the sun, resulting in lower cooling costs during hot summer months. Additionally, metal roofs often have insulation options that can further improve energy efficiency.
- Low Maintenance: Standing seam metal roofs require minimal maintenance compared to other roofing materials. They are resistant to rot, mold, and insect damage, and typically only require occasional inspections and cleaning.
- Aesthetics: Standing seam metal roofs offer a sleek and modern appearance that can enhance the curb appeal of a home. They come in various colors and finishes, allowing homeowners to customize the look of their roof to complement their architectural style.
- Potential Property Value Increase: A standing seam metal roof is considered a premium roofing option, and its durability and aesthetic appeal can potentially increase the value of your property.
However, it’s important to note that the cost of a standing seam metal roof is typically higher than traditional roofing materials such as asphalt shingles. The initial investment can be significant, especially if you have a large roof. It’s crucial to consider your budget and long-term plans for the property when evaluating the worth of a standing seam metal roof.
Ultimately, the decision of whether a standing seam metal roof is worth the cost depends on your priorities, financial situation, and specific circumstances. Consulting with roofing professionals, considering the local climate, and comparing different roofing options can help you make an informed decision.
Can you Install a Standing Seam Roof Over Shingles?
Yes, in some cases, it is possible to install a standing seam metal roof over existing shingles. This approach is known as a metal roof overlay or a retrofit installation. However, it’s important to note that there are considerations and potential drawbacks associated with this method.
Here are some points to keep in mind regarding installing a standing seam metal roof over shingles:
- Roof Condition: The existing shingles should be in good condition and structurally sound. If there are any signs of damage, such as curling, buckling, or water infiltration, it is generally recommended to remove the shingles before installing the metal roof. Installing over damaged shingles can lead to issues with the metal roof’s performance and longevity.
- Weight Load: Adding a layer of metal roofing on top of the existing shingles increases the weight load on the roof structure. It is crucial to ensure that the structure can handle the additional weight. Consult with a structural engineer or roofing professional to assess the load-bearing capacity of your roof.
- Surface Preparation: Proper surface preparation is essential for a successful metal roof installation. The existing shingles should be thoroughly cleaned and any loose or damaged shingles should be removed. The surface should be smooth and free of debris to ensure proper adhesion and prevent potential issues with the metal panels.
- Roof Profile and Ventilation: Installing a metal roof over shingles can affect the roof’s profile, potentially altering its appearance. Additionally, it may impact the ventilation of the roof system. Adequate ventilation is crucial for preventing moisture buildup and maintaining the durability of the metal roof. Consult with a roofing professional to ensure proper ventilation is maintained.
- Building Codes and Manufacturer Guidelines: Local building codes and manufacturer guidelines may have specific requirements regarding the installation of metal roofs over shingles. It’s important to check with your local authorities and adhere to the recommendations of the metal roofing manufacturer.
While installing a standing seam metal roof over shingles can provide cost savings by eliminating the need for shingle removal, it’s important to weigh the potential drawbacks and consult with roofing professionals experienced in metal roof installations. They can assess your specific situation, evaluate the condition of your roof, and provide recommendations on the best approach for your project.
7.00$
Metal Roof Starting Price
4 Days
to Completion (average)
10 Teams
Short Wait Times